For packagers ------------- Starting with this release, foot can be PGO:d (compiled using profile guided optimizations) **without** a running Wayland session. This means foot can be PGO:d in e.g. sandboxed build scripts. See [INSTALL.md](INSTALL.md#user-content-performance-optimized-pgo). Added ----- * IME support. This is compile-time optional, see [INSTALL.md](INSTALL.md#user-content-options) (#134). * `DECSET` escape to enable/disable IME: `CSI ? 737769 h` enables IME and `CSI ? 737769 l` disables it. This can be used to e.g. enable/disable IME when entering/leaving insert mode in vim. * `dpi-aware` option to `foot.ini`. The default, `auto`, sizes fonts using the monitor’s DPI when output scaling has been **disabled**. If output scaling has been **enabled**, fonts are sized using the scaling factor. DPI-only font sizing can be forced by setting `dpi-aware=yes`. Setting `dpi-aware=no` forces font sizing to be based on the scaling factor. (#206). * Implement reverse auto-wrap (_auto\_left\_margin_, _bw_, in terminfo). This mode can be enabled/disabled with `CSI ? 45 h` and `CSI ? 45 l`. It is **enabled** by default (#150). * `bell` option to `foot.ini`. Can be set to `set-urgency` to make foot render the margins in red when receiving `BEL` while **not** having keyboard focus. Applications can dynamically enable/disable this with the `CSI ? 1042 h` and `CSI ? 1042 l` escape sequences. Note that Wayland does **not** implement an _urgency_ hint like X11, but that there is a [proposal](https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/9) to add support for this. The value `set-urgency` was chosen for forward-compatibility, in the hopes that this proposal eventualizes (#157). * `bell` option can also be set to `notify`, in which case a desktop notification is emitted when foot receives `BEL` in an unfocused window. * `word-delimiters` option to `foot.ini` (#156). * `csd.preferred` can now be set to `none` to disable window decorations. Note that some compositors will render SSDs despite this option being used (#163). * Terminal content is now auto-scrolled when moving the mouse above or below the window while selecting (#149). * `font-bold`, `font-italic` `font-bold-italic` options to `foot.ini`. These options allow custom bold/italic fonts. They are unset by default, meaning the bold/italic version of the regular font is used (#169). * Drag & drop support; text, files and URLs can now be dropped in a foot terminal window (#175). * `clipboard-paste` and `primary-paste` scrollback search bindings. By default, they are bound to `ctrl+v ctrl+y` and `shift+insert` respectively, and lets you paste from the clipboard or primary selection into the search buffer. * Support for `pipe-*` actions in mouse bindings. It was previously not possible to add a command to these actions when used in mouse bindings, making them useless (#183). * `bold-text-in-bright` option to `foot.ini`. When enabled, bold text is rendered in a brighter color (#199). * `-w,--window-size-pixels` and `-W,--window-size-chars` command line options to `footclient` (#189). * Short command line options for `--title`, `--maximized`, `--fullscreen`, `--login-shell`, `--hold` and `--check-config`. * `DECSET` escape to modify the `escape` key to send `\E[27;1;27~` instead of `\E`: `CSI ? 27127 h` enables the new behavior, `CSI ? 27127 l` disables it (the default). * OSC 777;notify: desktop notifications. Use in combination with the new `notify` option in `foot.ini` (#224). * Status line terminfo capabilities `hs`, `tsl`, `fsl` and `dsl`. This enables e.g. vim to set the window title (#242). Changed ------- * Blinking text now uses the foreground color, but dimmed down in its off state, instead of the background color. * Sixel default maximum size is now 10000x10000 instead of the current window size. * Graphical glitches/flashes when resizing the window while running a fullscreen application, i.e. the 'alt' screen (#221). * Cursor will now blink if **either** `CSI ? 12 h` or `CSI Ps SP q` has been used to enable blinking. **cursor.blink** in `foot.ini` controls the default state of `CSI Ps SP q` (#218). * The sub-parameter versions of the SGR RGB color escapes (e.g `\E[38:2...m`) can now be used _without_ the color space ID parameter. * SGR 21 no longer disables **bold**. According to ECMA-48, SGR 21 is _”double underline_”. Foot does not (yet) implement that, but that’s no reason to implement a non-standard behavior. * `DECRQM` now returns actual state of the requested mode, instead of always returning `2`. Removed ------- * Support for loading configuration from `$XDG_CONFIG_HOME/footrc`. * `scrollback` option from `foot.ini`. * `geometry` from `foot.ini`. * Key binding action `scrollback-up` and `scrollback-down`. Fixed ----- * Error when re-assigning a default key binding (#233). * `\E[s`+`\E[u` (save/restore cursor) now saves and restores attributes and charset configuration, just like `\E7`+`\E8`. * Report mouse motion events to the client application also while dragging the cursor outside the grid. * Parsing of the sub-parameter versions of indexed SGR color escapes (e.g. `\E[38:5...m`) * Frames occasionally being rendered while application synchronized updates is in effect. * Handling of failures to parse the font specification string. * Extra private/intermediate characters in escape sequences not being ignored. Contributors ------------ * [kennylevinsen](https://codeberg.org/kennylevinsen) * [craigbarnes](https://codeberg.org/craigbarnes)
|10 months ago|
|.builds||1 year ago|
|completions||11 months ago|
|doc||10 months ago|
|icons||1 year ago|
|pgo||11 months ago|
|scripts||11 months ago|
|themes||10 months ago|
|.gitignore||2 years ago|
|.gitlab-ci.yml||1 year ago|
|.gitmodules||2 years ago|
|CHANGELOG.md||10 months ago|
|INSTALL.md||11 months ago|
|LICENSE||1 year ago|
|PKGBUILD||10 months ago|
|README.md||10 months ago|
|async.c||2 years ago|
|async.h||2 years ago|
|base64.c||11 months ago|
|base64.h||2 years ago|
|client-protocol.h||11 months ago|
|client.c||11 months ago|
|commands.c||1 year ago|
|commands.h||2 years ago|
|config.c||10 months ago|
|config.h||10 months ago|
|csi.c||10 months ago|
|csi.h||2 years ago|
|dcs.c||10 months ago|
|dcs.h||2 years ago|
|extract.c||1 year ago|
|extract.h||1 year ago|
|fdm.c||11 months ago|
|fdm.h||2 years ago|
|foot-features.h||11 months ago|
|foot-server.desktop||1 year ago|
|foot.desktop||1 year ago|
|foot.info||10 months ago|
|foot.ini||11 months ago|
|generate-version.sh||1 year ago|
|grid.c||11 months ago|
|grid.h||11 months ago|
|hsl.c||11 months ago|
|hsl.h||11 months ago|
|ime.c||11 months ago|
|ime.h||11 months ago|
|input.c||11 months ago|
|input.h||1 year ago|
|keymap.h||11 months ago|
|log.c||1 year ago|
|log.h||1 year ago|
|macros.h||1 year ago|
|main.c||10 months ago|
|meson.build||10 months ago|
|meson_options.txt||11 months ago|
|misc.c||1 year ago|
|misc.h||1 year ago|
|notify.c||11 months ago|
|notify.h||11 months ago|
|osc.c||11 months ago|
|osc.h||2 years ago|
|quirks.c||2 years ago|
|quirks.h||2 years ago|
|reaper.c||1 year ago|
|reaper.h||1 year ago|
|render.c||11 months ago|
|render.h||1 year ago|
|search.c||11 months ago|
|search.h||11 months ago|
|selection.c||11 months ago|
|selection.h||1 year ago|
|server.c||11 months ago|
|server.h||1 year ago|
|shm.c||11 months ago|
|shm.h||1 year ago|
|sixel.c||11 months ago|
|sixel.h||11 months ago|
|slave.c||1 year ago|
|slave.h||1 year ago|
|spawn.c||1 year ago|
|spawn.h||1 year ago|
|terminal.c||10 months ago|
|terminal.h||10 months ago|
|tokenize.c||1 year ago|
|tokenize.h||2 years ago|
|uri.c||1 year ago|
|uri.h||1 year ago|
|user-notification.h||1 year ago|
|util.h||1 year ago|
|vt.c||10 months ago|
|vt.h||2 years ago|
|wayland.c||11 months ago|
|wayland.h||11 months ago|
|xmalloc.c||1 year ago|
|xmalloc.h||1 year ago|
The fast, lightweight and minimalistic Wayland terminal emulator.
- Why the name 'foot'?
- Server (daemon) mode
- DPI and font size
- Supported OSCs
- Programmatically checking if running in foot
Lightweight, in dependencies, on-disk and in-memory
User configurable font fallback
On-the-fly font resize
On-the-fly DPI font size adjustment
Color emoji support
Synchronized Updates support
foot can be configured by creating a file
$XDG_CONFIG_HOME/foot/foot.ini (defaulting to
~/.config/foot/foot.ini). A template for that can usually be found
Further information can be found in foot's man page
See the wiki
Why the name 'foot'?
I'm bad at names. Most of my projects usually start out as foo something (for example, yambar was f00bar for a while).
So why foot?
foo terminal → footerm → foot
Pretty bad, I know.
As a side note, if you pronounce the foo part of foot the same way you pronounce foobar, then foot sounds a lot like the Swedish word fot, which incidentally means (you guessed it) foot.
foot supports all fonts that can be loaded by freetype, including bitmap fonts and color emoji fonts.
Foot uses fontconfig to locate and configure the font(s) to use. Since fontconfig's fallback mechanism is imperfect, especially for monospace fonts (it doesn't prefer monospace fonts even though the requested font is one), foot allows you, the user, to configure the fallback fonts to use.
This also means you can configure each fallback font individually; you want that fallback font to use this size, and you want that other fallback font to be italic? No problem!
If a glyph cannot be found in any of the user configured fallback fonts, then fontconfig's list is used.
These are the default shortcuts. See
man foot.ini and the example
foot.ini to see how these can be changed.
- shift+page up/page down
- Scroll up/down in history
- Copy selected text to the clipboard
- Paste from clipboard
- Paste from the primary selection
- Start a scrollback search
- ctrl++, ctrl+=
- Increase font size by 0,5pt
- Decrease font size by 0,5pt
- Reset font size
- Spawn a new terminal. If the shell has been configured to emit the OSC 7 escape sequence, the new terminal will start in the current working directory.
- Search backward for next match
- Search forward for next match
- Extend current selection (and thus the search criteria) to the end of the word, or the next word if currently at a word separating character.
- Same as ctrl+w, except that the only word separating characters are whitespace characters.
- Paste from clipboard into the search buffer.
- Paste from primary selection into the search buffer.
- escape, ctrl+g
- Cancel the search
- Finish the search and copy the current match to the primary selection
- left - single-click
- Drag to select; when released, the selected text is copied to the primary selection. This feature is disabled when client has enabled mouse tracking.
- Holding shift enables selection in mouse tracking enabled clients.
- Holding ctrl will create a block selection.
- left - double-click
- Selects the word (separated by spaces, period, comma, parenthesis etc) under the pointer. Hold ctrl to select everything under the pointer up to, and until, the next space characters.
- left - triple-click
- Selects the entire row
- Paste from primary selection
- Extend current selection. Clicking immediately extends the selection, while hold-and-drag allows you to interactively resize the selection.
- Scroll up/down in history
Server (daemon) mode
When run normally, foot is a single-window application; if you want another window, start another foot process.
However, foot can also be run in a server mode. In this mode, one process hosts multiple windows. All Wayland communication, VT parsing and rendering is done in the server process.
New windows are opened by running
footclient, which remains running
until the terminal window is closed, at which point it exits with the
exit value of the client process (typically the shell).
The point of this mode is a) reduced memory footprint - all terminal windows will share fonts and glyph cache, and b) reduced startup time - loading fonts and populating the glyph cache takes time, but in server mode it only happens once.
The downside is a performance penalty; all windows' input and output are multiplexed in the same thread (but each window will have its own set of rendering threads). This means that if one window is very busy with, for example, producing output, then other windows will suffer.
And of course, should the server process crash, all windows will be gone.
Typical usage would be to start the server process (
when starting your Wayland compositor (i.e. logging in to your
desktop), and then run
footclient instead of
foot whenever you
want to launch a new terminal.
By default, foot prefixes Meta characters with ESC. This corresponds
metaSendsEscape option set to
This can be disabled programmatically with
\E[?1036l (and enabled
When disabled, foot will instead set the 8:th bit of meta character
and then UTF-8 encode it. This corresponds to XTerm's
option set to
This can also be disabled programmatically with
rmm (reset meta
\E[?1034l), and enabled again with
smm (set meta mode,
Foot transmits DEL (
^?) on backspace. This corresponds to
backarrowKey option set to
false, and to DECBKM being
To instead transmit BS (
Note that foot does not implement DECBKM, and that the behavior described above cannot be changed.
Finally, pressing alt will prefix the transmitted byte with ESC.
By default, Num Lock overrides the run-time configuration
keypad mode; when active, the keypad is always considered to be in
numerical mode. This corresponds to XTerm's
numLock option set to
In this mode, the keypad keys always sends either numbers (Num Lock is active) or cursor movement keys (Up, Down, Left, Right, Page Up, Page Down etc).
This can be disabled programmatically with
\E[?1035l (and enabled
When disabled, the keypad sends custom escape sequences instead of numbers, when in application mode.
DPI and font size
Font sizes are apparently a complex thing. Many applications use a fixed DPI of 96. They may also multiply it with the monitor's scale factor.
This results in fonts with different physical sizes (i.e. if measured by a ruler) when rendered on screens with different DPI values. Even if the configured font size is the same.
This is not how it is meant to be. Fonts are measured in point sizes for a reason; a given point size should have the same height on all mediums, be it printers or monitors, regardless of their DPI.
Foot will always use the monitor's physical DPI value. Scale factors are irrelevant (well, they affect e.g. padding, but not the font size). This means the glyphs rendered by foot should always have the same physical height, regardless of monitor.
Foot will re-size the fonts on-the-fly when the window is moved between screens with different DPIs values. If the window covers multiple screens, with different DPIs, the highest DPI will be used.
Starting with foot-1.6, the default behavior is to use the monitor’s
DPI to size fonts when output scaling has been disabled. On monitors
where output scaling has been enabled, fonts will instead be sized
using the scaling factor. This can be changed with the
foot.ini. See the man page, foot.ini(5) for more
Note: if you configure pixelsize, rather than size, then DPI changes will not change the font size. Pixels are always pixels.
OSC, Operating System Command, are escape sequences that interacts with the terminal emulator itself. Foot implements the following OSCs:
OSC 0- change window icon + title (but only title is actually supported)
OSC 2- change window title
OSC 4- change color palette
OSC 7- report CWD
OSC 10- change (default) foreground color
OSC 11- change (default) background color
OSC 12- change cursor color
OSC 52- copy/paste clipboard data
OSC 104- reset color palette
OSC 110- reset default foreground color
OSC 111- reset default background color
OSC 112- reset cursor color
OSC 555- flash screen (foot specific)
Programmatically checking if running in foot
Foot does not set any environment variables that can be used to
identify foot (reading
TERM is not reliable since the user may have
chosen to use a different terminfo).
You can instead use the escape sequences to read the Secondary and Tertiary Device Attributes (secondary/tertiary DA, for short).
The tertiary DA response is always
FOOT in hex.
The secondary DA response is
foot's major, minor and patch version numbers, in decimal, using two
digits for each number. For example, foot-1.4.2 would respond with
Note: not all terminal emulators implement tertiary DA. Most implement secondary DA, but not all. All should however implement Primary DA.
Thus, a safe way to query the terminal is to request the tertiary, secondary and primary DA all at once, in that order. All terminals should ignore escape sequences they do not recognize. You will have to parse the response (which in foot will consist of all three DA responses, all at once) to determine which requests the terminal emulator actually responded to.
Please report bugs to https://codeberg.org/dnkl/foot/issues
The report should contain the following:
- Which Wayland compositor (and version) you are running
- Foot version (
- Log output from foot (start foot from another terminal)
- If reporting a crash, please try to provide a
bt fullbacktrace with symbols (i.e. use a debug build)
- Steps to reproduce. The more details the better
Every now and then I post foot related updates on @email@example.com
Foot is released under the MIT license.